- IP Management
- CMDB
- Configuration
This is an old revision of the document!
TeemIp's Datacenters Devices Management module is iTop's Datacenters Devices Management module that has been slightly adapted to integrate with TeemIp's specific IP objects. For a comprehensive reference to that module, please, refer to the Datacenter Management Module chapter in iTop wiki.
Here below is the list of iTop CIs that have been modified by TeemIp.
An Enclosure is a cabinet generally fitted with doors and side panels. Enclosures may contain baffles, fans, and other features. Then can be mounted inside a Rack or directly fitted on the wall.
A new attribute is added by TeemIP.
Name | Type | Mandatory? |
---|---|---|
IP Address | Foreign key to a(n) IPv4 or IPv6 Address | No |
Upon creation or modification, an IP Address attribute can be set as a foreign key to an IP address. A drop-down box will list a choice of available IP addresses.
A PDU (Power Distribution Unit) is a device fitted with multiple outputs designed to distribute electric power, especially to racks of computers and networking equipment located within the datacenter.
A new attribute is added by TeemIP.
Name | Type | Mandatory? |
---|---|---|
IP Address | Foreign key to a(n) IPv4 or IPv6 Address | No |
Upon creation or modification, an IP Address attribute can be set as a foreign key to an IP address. A drop-down box will list a choice of available IP addresses.
A Power Source is used to document in iTop any kind of power source (main power inlet, breaker…) that is not a PDU.
A new attribute is added by TeemIP.
Name | Type | Mandatory? |
---|---|---|
IP Address | Foreign key to a(n) IPv4 or IPv6 Address | No |
Upon creation or modification, an IP Address attribute can be set as a foreign key to an IP address. A drop-down box will list a choice of available IP addresses.
A computer Rack is a metal frame used to hold various hardware devices such as servers, hard disk drives, other electronic equipment. The available space inside a Rack is mesured the unit “U” (One U corresponds to 1.75 inches of space between each hole on the metal strips on the sides for screwing the devices in place)
A new attribute is added by TeemIP.
Name | Type | Mandatory? |
---|---|---|
IP Address | Foreign key to a(n) IPv4 or IPv6 Address | No |
Upon creation or modification, an IP Address attribute can be set as a foreign key to an IP address. A drop-down box will list a choice of available IP addresses.